Always-On Non-Dimmable Drivers are available for commercial and residential applications that require lighting and power supplies that are on a majority of the time. Non-dimmable drivers are for use with white tape light on an on/off switch, or to supply reliable, efficient low voltage power to RGB and RGB-W color controllers (which have on-board dimming functionality).
Although non-dimmable drivers are compatible with AC on/off switches, they are not dimmable with AC dimmer switches. |
60W Always-On Non-Dimmable Driver by Alloy LED
$98.33
- 60W Always-On Non-Dimmable Driver
- 120-277V AC Input
- 100% maximum load, 0 % minimum load
- Class 2
- Dry/wet environment (IP65)
- Dust tight and protected against jets of water
- ROHS & UL Recognized Component
- 7-year limited warranty
UPC # AL-98-04-12060-AO
Related product: 40W Always-On Non-Dimmable Driver by Alloy LED
Features
Technical Specifications
AL-98-04-12060-AO | |
---|---|
Output | |
DC Voltage¹ | 12V DC |
Rated Current | 5A |
Current Adj. Range | 3~5A |
Rated Power | 60W |
Ripple & Noise (Max.)² | 150mVp-p |
Voltage Tolerance³ | ±2.5% |
Line Regulation | ±0.5% |
Load Regulation | ±2.0% |
Setup, Rise Time⁶ | 1200ms,200ms/115V AC 500ms,200ms/230V AC |
Hold Up Time (Avg.) | 16ms at full load 230V AC /115V AC |
Input | |
Voltage Range⁴ | 120~277V AC |
Frequency Range | 47~63Hz |
Efficiency (Avg.) | >88% (12V DC) |
AC Current (Avg.) | 0.85A / 115V AC 0.425A / 230V AC 0.4A / 277V AC |
Inrush Current (Max.) | COLD START 70A (twidth=485μ s measured at 50% Ipeak) at 230V AC; Per NEMA 410 |
Leakage Current | <0.75mA /277V AC |
Protection | |
Overload | 95~108% rated output power |
Protection type: Hiccup mode, recovers automatically after fault condition is removed | |
Over Voltage | 14~17V |
Protection type: Shut down o/p voltage, re-power on to recover | |
Environment | |
Operating Temp. | -40~+90°C, -40~194°F |
Working Humidity | 20~95% RH, non-condensing |
Storage Temp., Humidity | -40~+80°C, -40~176°F / 10~95%RH |
Temp Coefficient | ±0.03%/°C (0~60°C, 32~144°F) |
Vibration | 10~500Hz, 2G 10 min./1 cycle, period for 60 min. each along X, Y, Z axes |
Safety & EMC | |
Safety Standards | UL87500, CAN/CSA C22.2 No.223-M91, IP65 approved; design refer to TUVEN60950-1 |
Withstand Voltage | I/P-O/P: 3.75KV AC |
Isolation Resistance | I/P-O/P:>100MΩ/500V DC/25°C, 77°F/70% RH |
EMC Emission | Compliance to EN55022 (CISPR22) ClassB, EN61000-3-2 Class A,EN61000-3-3 |
EMC Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A |
Other | |
Warranty | 7 Year Limited |
MTBF | 1131.9K hrs min. Telcordia SR-332 (Bellcore) ; 336.5K hrs min. MIL-HDBK-217F (25°C, 77°F) |
Size | 7.7″L x 2.42″W x 1.4″H |
|
Additional information
Additional information
Dimensions | 7.70 × 2.42 × 1.40 in |
---|---|
Input Voltage | 120V AC, 120~277V AC |
Output Voltage | 12V DC, 24V DC |
Wattage | 36W, 40W, 60W, 100W, 150W |
Type | Plug-In, Hard-Wired |