| Converts DMX Signal to 0-10V Dimming Signal Complies with both DMX RDM and Traditional DMX Networks Use Driver Dim-to-Off Capability to Eliminate AC Switch or Relay Powered by 12Vdc with Simple 3-Wire Connection to Driver Low Standby Power < 0.5W At Power on the 0-10V Output Remains at 0V until DMX Signal is Received In the Event of DMX Signal Loss, the 0-10V Output Will Not Change Waterproof (IP67) and UL Dry / Damp / Wet Location Suitable for Built-in Use |
CNV-DMXR RDM to 0-10V Converter by Inventronics
$36.58
- Converts DMX Signal to 0-10V Dimming Signal
- Complies with both DMX RDM and Traditional DMX Networks
- Use Driver Dim-to-Off Capability to Eliminate AC Switch or Relay
- Powered by 12Vdc with Simple 3-Wire Connection to Driver
- Low Standby Power < 0.5W
- Waterproof (IP67) and UL Dry / Damp / Wet Location
- Suitable for Built-in Use
Features
Technical Specifications
| Description | |
|---|---|
| The CNV-DMXR is a DMX RDM to 0-10V converter that enables one or more Inventronics Controls-Ready drivers to be controlled by a DMX system. The CNV-DMXR is compatible with LED drivers with dim-to-off capability, 12V/200mA auxiliary power supply and 0-10V dimming input. DMX RDM (Remote Device Management) permits intelligent bidirectional communication between devices from multiple manufacturers utilizing a modified DMX512 data link. This allows the DMX RDM compatible device to be addressed and configured remotely, using a compatible DMX RDM master. DMX RDM devices are inherently compatible with standard DMX networks. |
Additional information
Additional information
| Dimensions | 2.72 × 1.50 × 1.06 in |
|---|
