|Rated for insulation contact (IC).|
Not available for spray insulation.
Electrocoated 16-gauge cold-rolled steel provides enhanced structural reinforcement and rust prevention.
Superior, UL-certified, injection-molded commercial-grade Lexan™ (PC) is used for the frame and regressed bezel trim.
An advanced mounting system allows for quick and secure installation with LED and driver serviceability from below the ceiling.
The LED assembly uses die-cast aluminum mounting clamp grips (MCG) that swing out to
Integrated rubber feet on each MCG provide a non-slip vibration-resistant installation.
ULus Listed to UL2108, cUL Listed to CSA C22.2 #250.0
IP65 with lens – Suitable for wet locations with lens – Suitable for damp locations without lens
Non-conductive, Lexan dead-front construction
Made in the USA – meets the requirements of the Buy American provision within the ARRA
EcoNU4QD IC-NoBox Square Downlight by Alphabet Lighting
The EcoNU4QD IC-No Box is an economical and highly efficient spec grade 4″ recessed downlight with thoughtful construction and pleasing aesthetics.
Offered standard with premium dimming using EldoLED 1% flicker free drivers 120V-277V universal voltage. Also offered 347V.
- Several beam angles available, plus an optional high-efficiency BrightView diffused lens for smooth light distribution and obscured LED image.
- For the trim version, a minimalistic look is achieved with an ultrathin 1/16″ trim that is only 5/16″ wide. Color choices of both trim and bezel are offered for a customized look.
- For the trimless version, a perforated, mud up, regressed trim assembly provides for clean, trim free installation. Perforated mud frame’s integrated lip helps guide the joint compound creating a sharp and clean opening.
Related product: EcoNU4QDR 4″ Square Downlight Round Bezel by Alphabet Lighting
|Wattage||7W – 12W|
|Reflector||60° – 80°|
|CCT||2200K – 5000K|
|Power Factor||≥ 0.9|
|Dimensions (in.)||Trim: 6.75″ L x 14.75″ – 26″ W x 4.38″ H|
Trimless: 6.75″ L x 14.75″ – 26″ W x 4.38″ H
QDTMW: 4.25″ W x 0.31″ H
|cETL Listed||CSA C22.2 #250.0|
|SDCM||2-Step MacAdam Ellipse|
|Rated Lifetime (L70)||> 49,500 – 55,000 hrs.|
Square Downlight, Square Downlight Trimless, Square Downlight Trimless Millwork
New Construction w/ Ceiling Fitting Plate (IC rated) – inherently protected, Retrofit w/o Ceiling Fitting Plate (IC rated) – inherently protected