Applications The DCC2 can operate a wide array of Wattstopper products, including lighting control panels, occupancy sensors and power packs. Additionally, its simple contact closure interface can provide a momentary on and off signal to many other devices, allowing it to initiate actions for other manufacturer’s devices (e.g., those that output DMX512 or RS485 signals that can control LEDs or other lighting systems.) |
Features Decorator styling compatible with screwless or standard wall plates Quiet operation Multiway switching Long-life LED locator or pilot light Available in four colors Three-wire momentary on/off contact operation |
Operation When the top of the switch is pressed down, the DCC2 makes an internal contact between an on and common terminal. When the bottom of the switch is pressed, it makes an internal contact between an off and common terminal. This allows the switch to provide an on/off signal to a relay panel or other device. Three- and four-way switching is easily accomplished by parallel wiring a DCC2 to any number of other DCC2 switches. And by field wiring a jumper between the on and off terminals, the DCC2 can provide a two-wire momentary output to allow its use with Wattstopper occupancy sensors or the manual-on BZ-150 Universal Voltage Power Pack. |
Locator or Pilot Light The DCC2 includes an internal green LED which can function as either a locator or pilot light, depending upon the application and how the switch is wired. By incorporating an LED inside the switch instead of another light source, the end-user is assured of both a long lamp life and very low power consumption. |
DCC2 Decorator Low Voltage Momentary Switch by Wattstopper
From: $29.62 $29.62 – $34.07
The Decorator Low Voltage Momentary Switch (DCC2) has a clean appearance and provides significant benefits over other three-wire momentary devices. It is intended for use with WattStopper lighting control panels and other applications requiring a momentary contact switch that provides on/off signals. Available in four colors, it complements other decorator devices and matches the full line of Wireless Lighting Control Decorator products.
12VAC/VDC, 24V Rectified, 24VAC/VDC
Note: The DCC2-W in White finish has been discontinued by the manufacturer and replaced by the Low Voltage Wall Switch LVSW-101-W. Any orders of this product will be fulfilled with the replacement product.
Volts: 12VAC/VDC; 24V Rectified; 24VAC/VDC50mA Max. Internal Contact rating 500mΩ resistance when closed Single pole, double throw with center position rest Fits conventional decorator switch openings Dimensions: 2.64” x 1.75”x 1.98” (67.1mm x 44.5mm x 50.3 mm) L x W x D; depth in wall 1.65” (41.9mm) Five-year warranty |
Additional information
Finish | Black, Ivory, Light Almond, White |
---|