Easy-to-read LCD display prompts installer through set-up |
Four user-adjustable parameters: on setpoint, off setpoint, off setpoint time delay, and โHold On While Occupiedโ Mode (if wired with an occupancy sensor) |
Test mode overrides programmed time delay, enabling installer to verify accuracy of settings |
Control load status verification allows testing and confirmation that wiring is correct |
Form factor designed to eliminate misalignment |
LED status indicator identifies when device is in override or test mode, or if device has switched lights on or off |
Mounting options for top- or side-lit applications |
One-hour manual override capability (when wired with low voltage, push button wall switch) |
Programmable in most daylight conditions |
BAA/TAA-compliant models available |
LightSaver LS-102 Daylighting Controller by Wattstopper
$139.70
The LS-102 Daylighting Controller is a single zone, on/off switching device designed to be installed in a closed loop application. A self-contained 24 VDC device with an extended range of 1-1400 footcandles, the LS-102 requires a low voltage power pack to operate. The controller consists of an advanced digital multi-band photosensor, an on-board microcontroller, and an LCD display. This photosensor is positioned behind a 100ยบ cone that cuts off unwanted light, preventing false triggers.
- Single zone, on/off switching photosensor
- Automatic setpoint selection
- Easy-to-read LCD display and LED status indicators
- Automatic startup/calibration
- Digital multi-band photosensor
- Multiple user-adjustable control parameters
Description
The LS-102 Daylighting Controller by Wattstopper is a single zone, on/off switching device designed to be installed in a closed loop application. A self-contained 24 VDC device with an extended range of 1-1400 footcandles, the LS-102 requires a low voltage power pack to operate. The controller consists of an advanced digital multi-band photosensor, an on-board microcontroller, and an LCD display. This photosensor is positioned behind a 100ยบ cone that cuts off unwanted light, preventing false triggers.
Operation
Setpoints can be selected either automatically or manually. When ambient light levels exceed the off setpoint, the controller turns lighting off. It will turn lighting systems back on when the on setpoint is triggered. Because of its automatic calibration feature, many applications require little or no adjustment of the settings. The LS-102 can be paired with a low voltage wall switch to enable manual override, or with an occupancy sensor to enable its โHold On While Occupiedโ feature.
Automatic Startup/Calibration
The LS-102 Daylighting Controller by Wattstopper features automatic setpoint calculations. The device initiates a procedure to select an appropriate value for the on setpoint. As part of the process, the controlled load is first turned on for a brief interval to warm up the lamps, and then switched off. This process is repeated several times. At the completion of the calibration, a new value for the on setpoint will have been selected. Other adjustable settings include deadband and time delay settings. If desired, the deadband can be adjusted to a value of 25, 50, 75, or 100 percent above the setpoint. The time delay can be adjusted to 3, 10, 20 or 30 minutes.
Applications
The LS-102 can be used to control any type of lighting: incandescent, fluorescent, compact fluorescent (CFL), HID, and LEDs. The devices work in peripheral offices, skylit areas, cafeterias, warehouses and any other indoor area with natural light contribution.