From: $168.08 $168.08 – $283.09
EOSW-100 Series RF Wall Switches work with EOPC-100 wireless occupancy sensors, and optional EORS-100 and EOHR-100 remote switches, to turn lights on and off based on occupancy. Models are available to control one or two switched legs in applications with or without neutral wires at the switch box.
Single and dual relay 120/277VAC RF-enables switches
Replace standard wall switches for energy code compliance without the need for rewiring
Receiver for wireless communication with RF occupancy sensors and remote switches
Default settings for most energy efficient operating mode out of the box
Loads can be assigned to either button (dual relay switches)
Wireless Wall Switch Receivers
EOSW-100 Series RF Wall Switches work with EOPC-100 wireless occupancy sensors, and optional EORS-100 and EOHR-100 remote switches, to turn lights on and off based on occupancy. Models are available to control one or two switched legs in applications with or without neutral wires at the switch box.
Operation
Both single and dual relay Wireless Wall Switch Receivers fit in single gang junction boxes for direct control of one or two loads. Each wall switch can be paired with one or more EOPC-100 wireless sensors for occupancy-based control. By default, single relay wall switches operate in manual-on/automatic-off mode. Dual relay switches are factory set for auto-on to 50%; relay 1 is automatic on/off, and relay 2 is manual-on/automatic-off. When occupancy is no longer detected and the time delay elapses, lights automatically turn off. These sequences of operation, and other default settings, may be changed using hidden configuration buttons.
Control Options and RF Communications
EOSW-100 RF dual relay switches allow for separate pairing of each controlled load (relay) to the integral switch buttons. Additionally, each load may be paired with selected wireless occupancy sensors and selected buttons on RF remote switches. The RF transmission range is approximately 50’ to 150’ depending on product placement.
Applications
RF wall switches are ideal for retrofit applications with or without neutral wires where the switch location is not suitable for sensing occupancy, and it is difficult to install a wired ceiling sensor. Paired with wireless occupancy sensors, EOSW-100 RF switches are perfect for retofitting small conference rooms, private offices, executives office, hallways and storage rooms.
| Type | Neutral, No Neutral |
|---|---|
| Relay | Single Relay, Dual Relay |
| Color | White, Light Almond, Ivory, Grey, Black |
